Pro-face PFXGM4201TAD Manuale Scaricare il pdf (Pagina 52)

GP-4201TM/4301TM/4000M Hardware Manual

 When mounting the GP unit vertically, ensure that the right side of the unit faces

up (i.e. the yellow button should be at the left).

 The unit is at least 100 mm (3.94 in.) away from adjacent structures and other

equipment for easier maintenance, operation and improved ventilation:

Step Action

1 Place the unit on a clean and level surface with the display panel facing downward.

2 The support thickness depends on the material:

 Steel: 1.5 to 6 mm (0.06 to 0.23 in.)

 Glass fiber reinforced plastics (minimum GF30): 3 to 6 mm (0.11 to 0.23 in.)

If the panel thickness is less than the above values, use the spacer in Accessories

kit (sold separately). For the panel thickness and materials when using the spacer,

please refer to "2mm-hight spacer" (see page 50).

Create the correct sized holes required to install the unit, using the Panel Cut-out

Dimension and Installation (see page 47).

NOTE:

The field wiring opening for controller when mounted onto an enclosure shall

have an area of not more than 775 mm

(1.2 in

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 73 74

Nessun commento

Pro-face PFXGM4201TAD Manuale Pagina 52